Insl-x® Waterborne Pool Paint is a waterborne acrylic emulsion pool paint that can be applied over most existing pool paints in good condition. This paint may also be used on bare concrete, marcite, gunite and other masonry surfaces in sound condition.
Note: The application of any paint to a pool surface that is in need of resurfacing, will lead to premature failure of pool paint.
For this reason, Insl-x® recommends contacting a licensed pool contractor if there are any signs of surface failure such as loose, flaking or chipping marcite, gunite or concrete. This product is not recommended for metal, fiberglass or vinyl lined pools Once Insl-x® Waterborne Pool Paint is used, do not recoat with any other coating system for future paint applications.
COVERAGE
Under normal circumstances, average spreading rate is 250-300 sq. ft. (23.2-27.9 sq. meters) per gallon. Material loss during application and mixing will vary by project but should be taken into consideration when estimating the project requirements.
The following Chart will give approximate swimming pool paint required for 2 coats at the recommended spread rate.
Pool Size - Gallons Needed
12 x 24 - 4
15 x 30 - 6
20 x 40 - 9
25 x 45 - 13
25 x 100 - 27
30 x 60 - 20
40 x 100 - 38
INSL-X Paint Product Selection Guide
INSL-X Waterborne Paint Guide
INSL-X Pool Paint FAQs
