This pool paint is currently on backorder. Please give us a call for our current remaining stock of colors.
Chlorinated Rubber Based Pool Paint provides a great, cost effective way to restore pool, making it look like new again. The rubber based formula ensures a smooth, even application and specially made to resist fading, fungus, algae, abrasion or alkalis, ensuring a durable finish and long lasting results. Can conveniently be used on new or old, residential or commercial concrete pools.
Insl-x® Chlorinated Rubber Based Pool paint is a premium coating that offers excellent chemical and abrasion resistance. It can be applied over most existing chlorinated rubber and pliolite based pool paint in good condition. This paint may also be used on bare concrete, marcite, gunite and other masonry surfaces in sound condition. Note: The application of any paint to a pool surface that is in need of resurfacing, will lead to premature failure of pool paint. For this reason, Insl-x® recommends contacting a licensed pool contractor if there are any signs of surface failure such as loose, flaking or chipping marcite, gunite or concrete. This product is not recommended for metal, fiberglass, vinyl lined pools, hot tubs and spas or where the water temperature is above 95 ºF (35 °C).
COVERAGE
Under normal circumstances, average spreading rate is 250-300 sq. ft. per gallon. This product is high solids and will generally go much further than non-compliant pool paints. Material loss during application and mixing will vary by project but should be taken into consideration when estimating the project requirements.
The following Chart will give approximate swimming pool paint required for 2 coats at the recommended spread rate.
Pool Size Gallons Needed
12 x 24 - 4 + 1 gal.
15 x 30 - 5 + 1 gal.
20 x 40 - 10 + 2 gal.
25 x 45 - 13 + 2 gal.
25 x 100 - 27 + 4 gal.
50 x 100 - 44 + 7 gal.
70 x 140 - 82 + 13 gal.
INSL-X Paint Product Selection Guide
INSL-X Rubber-Based Paint Guide
INSL-X Pool Paint FAQs
