Fiberlock Penewet Wetting Agent Surfactant - 5g

Fiberlock PENEWET Asbestos Wetting Agent - 5 gal

Removing crumbly asbestos-containing material (ACM) can send clouds of fibers and dust billowing into the workplace. Spraying with Penewet eliminates the hazard by wetting the ACM and making it safe to handle.  A surface treated with Penewet stays wet at least 5 times longer than with competitive products. Its chemically advanced wetting/penetrating/binding action saturates the entire mass of ACM. So it's easy to scrape and bag the damp, ACM mass material without stirring up dangerous asbestos dust.

DESCRIPTION

Product No.: 6450 clear

Penewet is an ready-to-use, colorless wetting agent/surfactant solution incorpororating advanced concepts in surface chemistry. It provides powerful wetting, penetrating and coalescing of asbestos containing materials (ACM) to permit handling and removal of these materials under damp, dust-free conditions. Penewet is nonflammable water based nontoxic liquid which will not corrode aluminum components of spray equipment.

PROPERTIES

• Solids by Weight: 10 +/-2%
• Volatile: Water
• Average particle size: 0.2 microns
• Viscosity @ 77°F: 50-55 Krebs Units
• Weight per gallon @ 77°F: 8.8 lbs.
• Ionic nature: Non-ionic
• Flammability: Non-flammable
• Phosphate free?: Yes
• Surface tension: 31 dynes/cm.
• Coverage: 500 sq.ft./gal.
• Shelf Life: @ 77°F, 36 months minimum, original factory sealed containers).
• Odor: Applied indoors, virtually odorless.

Product Data Sheet

Material Safety Data Sheet (MSDS)