Fiberlock IAQ 6100 Mold Resistant Coating is a clear mold-resistant coating for professional use that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film. This durable, flexible, permeable, 100% acrylic water-based semi-gloss coating applies white, so the user can ensure complete and thorough application, and then dries to a clear finish. The clear coating allows surfaces to retain their natural look and permit future visual inspection of the coated surfaces.
It has been tested by independent and certified laboratories to prove resistance to mold growth on the surface of the coating, and it has successfully passed ASTM G-21 mold resistance testing with the highest scores possible.
Fiberlock IAQ 6100 is recommended to deter mold growth on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal, and galvanized metal. IAQ 6100 can also be used on new structural materials to help prevent mold growth during building construction. Fiberlock IAQ 6100 does not contain any compounds with toxic metals, such as barium, boron, or zinc, which are present in other mold-resistant coatings.
NOT FOR USE IN HVAC SYSTEMS/COMPONENTS
SPECIFICATIONS
- Coverage (smooth): 250-400 sq ft per gallon
- Coverage (porous) 150-300 sq ft per gallon
- Goes on white, dries clear
- Contains EPA-registered antimicrobials
- 10 year warranty
- Qualifies for LEED® EQ Credit 4.2
APPLICATION
- Brush: Synthetic, nylon or polyester bristle
- Roller: Synthetic Fiber 3/8” nap or longer
- Spray Settings: Pressure: 2000-2800 P.S.I.Tips: .015 to .019 tips
IAQ 6100 is supplied ready to use but can be thinned sparingly with water (up to ½ pint water per gallon) for proper application consistency if necessary. Apply one coat of IAQ 6100, and ensure that the finished surface is properly sealed. To ensure that the finished surface is properly sealed, two coats may be required on some porous surfaces.
