Fiberlock IAQ 6000 Mold Resistant Coating
IAQ 6000 is a white, tintable mold resistant coating that contains a fungicide agent to resist mold growth on the dry coating surface. IAQ 6000 is a durable, flexible, and permeable 100% acrylic water based coating. IAQ 6000 has been tested by independent and certified
laboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed both ASTM G-21 and ASTM D-3273 mold resistance testing with the highest scores possible. IAQ 6000 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. IAQ 6000 can also be used on new structural materials during building construction.
TINTING
IAQ 6000 may be tinted to any off-white
or pastel based color. Add up to 2 oz. of
universal colorant per gallon. Start with
50% of the tinting formula and adjust as
necessary.
APPLICATION
IAQ 6000 is supplied ready to use, but can
be thinned sparingly with water (up to 1/2
pint water per gallon) for proper application
consistency if necessary. Apply IAQ 6000
generously and uniformly by brush, roller,
or airless spray. Apply one coat of IAQ 6000
and ensure that the finished surface is
properly sealed. To ensure that the finished
surface is properly sealed, two-coats may
be required on some porous surfaces.
COVERAGE
Smooth Surfaces- 250-400 sq. ft. per gallon
Porous Surfaces- 150-300 sq. ft. per gallon
DRYING TIME @ 70°F 50% R.H
To Touch - 1 Hour
Recoat - 4 Hours
CLEANUP
Clean tools and drippings with warm
soapy water before Fiberlock IAQ 6000
dries. Dispose of all waste according to all
existing local, state and federal regulations.
Product Data Sheet
Material Safety Data Sheet (MSDS)
